Dynamix 2500 Data Collector
Dynamix® data collectors are real-time, multi-channel Fast Fourier Transformer (FFT) signal analysers and data collectors.
They are used to analyse and correct the causes of faults in your machines and are therefore an important part of your condition-based and predictive maintenance strategy.
These powerful instruments have the fastest processors and auto-calibration options considerably reducing the time you spend collecting data.
The Dynamix™ 2500 data collectors are ideal for trending and diagnostic machinery vibration measurements on fans, pumps, motors, compressors, conveyors, mixers, centrifuges, hammer mills and gearboxes. These collectors are also ideal in field analysis for :
- Machinery unbalance
- Resonance problems caused by poor foundations, machinery running speeds set too close to structural frequencies and piping- and/or process-induced frequencies
- Machine motion during start-up or deceleration
- Time recordings of a machine’s vibration for remote analysis
- Multi-channel machine train (using the off-route mode, can gather and and compare up to 4 channels of vibration data)
Measurement signal
Signal detection
RMS, Peak, Peak-Peak, True Peak, True Peak-Peak
Input signal type
ICP accelerometer, Velocimeters, Displacement sensors, Infrared sensors, Accel/Vel sensor, AC/DC voltage, Manual entry
Input signals
ICP (24V at 2.4mA), AC/DC sensors, Power-power input, Tachometer
Measurement
Acceleration, Speed, Displacement, gSE, ESP, Temperature, Phase, Voltage, User-defined
Measurement types
Global, Spectral, Temporal, Standardised order phase, Spectral band alarm
Sensor test
"Bias Voltage" integrity
Auto calibration
Yes
Dynamic range
>90 dB typical
Detail
5%
Frequency ranges
0.16Hz to 80kHz
High Pass filters
0.18Hz; 0.3Hz; 2Hz; 2.67Hz; 5.3Hz; 10Hz; 27.8Hz; 70Hz
gSE filters
100Hz; 200Hz; 500Hz; 1000Hz; 2000Hz; 5000Hz
ESP filters
0,6 - 1,25 kHz; 1,25 - 2,5 kHz; 2,5 - 5 kHz; 5 - 10 kHz; 10 - 20 kHz
Real time
80 kHz
FTT resolution
100 - 25,00 lines
Time frame
256 - 16,384 samples
Averaging
Spectral, temporal, peak hold and continuous
Alarms
Overall level and spectral
Enclosure
Size
186 x 93 mm (narrowest point) 186 x 134 mm (widest point)
Weight
715 g
Screen
LCD colour backlit ¼ VGA (240 x320) 58 x 72 mm visible
Connectors
Signal input: 7-pin Lemo / Power source: 7-pin Lemo / Trigger: 7-pin Fischer
System
PC communication
USB with Microsoft ActiveSync
Indicators
Red, orange, green LEDs
Battery
Rechargeable Lithium-Ion, 8 hours operating time
Operating system
Windows CE
Environment
Enclosure
IP65 (waterproof and dustproof)
Drop resistance
2 meters - Mil 810 Spec
Temperature
Operating temperature: -10°C +50°C / Storage temperature: -20°C + 60°C
Memory
Internal RAM
128 Mbytes RAM
External memory
SDHC up to 16GB
Disk (user data)
40 Mbytes FLASH
Certifications
C-Tick, CE, CSA (Class 1, Division 2, Groups A, B, C, D)