E420 basic system
Easy-Laser® E420 sets a new standard in entry level laser systems for shaft alignment.
It has wireless measuring units, a large 5.7″ colour display and an IP65-rated design (in compliance with IP65 standards) that withstands harsh environments.
The measuring units are easy to install on most types of machines, even when there is limited space. The wireless technology gives you full freedom of movement around the machine that is to be aligned.
Programmes for alignment of horizontal and vertical machines are included. Added to that are functions for soft foot control, thermal growth compensation and tolerance control.
The measurement system is very easy to use. Pre-mounted units make it easy to install on the machine and the programmes guide you step-by-step through the process.
The EasyLaser E420 system is used to:
- Align horizontal machines
- Align vertical machines
- Check bearing clearance
System
Relative humidity
10-95%
Total weight
6,3 kg
Case dimensions (W x H x D)
500 x 415 x 170 mm
Measuring unit ELM40 / ELS40
Type of detector
TruePSD 20 mm
Wireless communication
Class I Bluetooth® wireless technology
Operating time
>4 hours
Resolution
0.01 mm
Measuring errors
±1% +1 digit
Measurement range
Up to 3 metres
Type of laser:
Diode laser
Laser wavelength
635-670 nm
Laser class
Protection class II
Laser output
<1mW
Electronic inclinometer
0.1° resolution
Temperature sensors
-20 to 60°C
Environmental protection
IP class 65
Temperature range
-10 to 50°C
Materials
Anodised aluminium/ABS plastic
Dimensions (W x H x D)
69 x 61.5 x 41.5 mm
Weight
176 g
Screen
Type of display/Size
VGA 5.7" (14.5 cm) colour screen, backlit LED
Resolution
0.01 mm
Internal battery (fixed)
Heavy duty Li-ion rechargeable batteries
Operating time
Approximately 30 hours (in normal operation)
Temperature range
-10 to 50°C
Connections
USB A, Charger
Wireless communication
Class I Bluetooth® wireless technology
Internal memory
More than 2,000 measurements can be saved
Help functions
Calculator, unit converter
Environmental protection
IP class 65
Materials
PC/ABS + TPE
Dimensions (W x H x D)
250 x 175 x 63 mm
Weight (excluding battery)
910 g
Cables
Charger cable
Length 1 metre (splitter cable)
Brackets, etc.
Shaft bracket
Type: V-fixture for chain, width 18 mm Shaft diameter 20-450mm Material: Anodised aluminium
Rods
Length: 120 mm, 60 mm (extendible) Material: stainless steel
PC EasyLink™ Software
System requirements
Windows® XP, Vista, 7. For the export functions, Excel 2003 or newer must be installed on the PC.