E710 Expert
The Easy-Laser E710 system is a cost-effective, efficient system for rotating machines.
The measuring units integrate Bluetooth® technology for wireless communication. Only 20° between each measurement point required to display the results. The machine can be adjusted (horizontally and vertically) in real time using the values displayed on the screen. A PDF report is generated automatically when the measurements are saved. Simple and efficient!
In addition, with its two 2 axis 20x20mm detectors, alignments are even more precise and easier to measure.
The E710 also has all the geometry programmes (straightness, flatness squareness, parallelism, etc.)
By using a simple instrument, you can resolve faults and prevent the premature wear of your machines. A PDF report is generated automatically when the measurements are recorded.
System
Relative humidity
10-95%
Total weight
10 kg
Case dimensions (W x H x D)
500 x 400 x 200 mm Drop tested. Dust and water protection
The measuring programmes of the E710 system allow you to:
- Align the shafts (horizontal and vertical machines)
- Align the pulleys
- Measure the vibration
- Measure the flatness
- Measure the straightness
- Check bearing clearance
Type of detector
2-axis TruePSD 20x20 mm
Resolution
0.001 mm
Measuring errors
±1% +1 digit
Measurement distance
Up to 20 metres
Type of laser
Diode laser
Laser wavelength
635-670 nm
Laser class
Class II
Laser output
<1mW
Electronic inclinometer
0.1° resolution
Thermometers
±1°C accuracy
Environmental protection
IP class 66 and 67
Temperature range
-10-50°C
Internal battery
Li Po
Materials
Anodised aluminium
Dimensions (W x H x D)
60 x 60 x 42 mm
Weight
202 g
Type of display
Type of display/Size
VGA 5.7" (14.5 cm) interactive colour screen, backlit LED
Resolution
0.001 mm
Energy saving
Endurio system for uninterrupted power supply
Internal battery (fixed)
Heavy duty Li Ion chargeable
Battery compartment
For 4 x R14 ©
Operating time
Approximately 30 hours (in normal operation)
Temperature range
-10 to 50°C
Connections
USB A, USB B, External, Easy Laser® units, Network
Wireless communication
Class I Bluetooth® wireless technology
Internal memory
More than 100,000 measurements can be saved
Help function
Calculator, converter
Environmental protection
IP class 65
Materials
PC/ABS + TPE
Dimensions (W x H x D)
250 x 175 x 63 mm
Weight (excluding battery)
1,080 g
Bluetooth® device for wireless communication
Wireless communication
Class I Bluetooth® wireless technology
Temperature range
-10 to 50°C
Environmental protection
IP class 66 and 67
Materials
ABS
Dimensions (W x H x D)
53 x 32 x 24 mm
Weight
25 g
Cables
Cables
Length 2 metres, with Push/Pull connection
USB Cable
Length 1.8 metres
Brackets, etc.
Shaft bracket
V fixture with chain, width 18 mm Shaft diameter 20-450mm Material: anodised aluminium
Magnet bases
Holding strength 800 N
Offset bracket
Displacement 32 or 16 mm
Rods
Length: 120 mm, 60 mm (extendible) Material: stainless steel