XT280 Vibration measurement
Easy-Laser® XT280 is an easy-to-use vibration monitoring and analysis tool that allows easy display of vibration signals.
The XT280 automatically performs vibration analysis functions based on machine running speed to help diagnose faults such as unbalance, misalignment and looseness. The system is designed to enable you to take vibration measurements from assets like pumps, motors, fans and bearings. The unit displays vibration frequency plots and allows vibration severity and bearing condition to be monitored.
Vibration measurement and analysis
Easy-Laser® XT280 VIB system, Part No. 12-1090
Frequency range
2 Hz to 1kHz (ISO) 1 kHz to 10 kHz (BDU)
Max frequency resolution
1.25 Hz @ 800 lines FFT setting
Displayed amplitude units
Acceleration in g / Velocity in mm/s (or inch/s) / Bearing noise in BDU (bearing damage units)
Displayed Frequency Units
Hertz (Hz), RPM or CPM
Input range
User selectable with accelerometer sensitivity
Dynamic range
96 dB (0.01g resolution)
VA diagnostic bands (RPM=run speed)
Unbalance 1x RPM / Alignment 2x RPM / Looseness 3x RPM
Operating temperature
0°C to 50°C
Storage temperature
-20°C to 70°C
Battery type
2 x AA batteries
Battery operation
20 hours continuously (depending on brightness setting)
Environmental protection
IP67
Material
ABS plastics / Hard anodized aluminium
Dimensions
WxHxD: 200 mm x 60mm x 26mm [7.8 x 2.4 x 1.0"]
Weight
280 g [9.8 oz]
- Long probe, Part No.03-1326
- Magnet, Part No. 03-1327